The X-1 is the smallest version of the X-Splash available, designed for small plant and equipment.
How it works:
The wash bay is made with a diamond tread ramp and a 2200mm high wall. The wash bay floor pan directs the dirty water and sludge from the equipment being cleaned to a solids collection tank at the rear of the wash bay. Inside the rear tank, a float switch activates a diaphragm pump which delivers the dirty water into the filtration tanks to start the filtration process. After the water has been through this process, a booster pump delivers the water again to your pressure washer. Through the filtrating system, you can use the same water repeatedly. The filters inside the separator tank can be easily replaced, guaranteeing an adequate filtering barrier.
• The system allows you to recycle water and therefore the contaminated
water does not get into the drainage system;
• Less water used means more money is saved, and more savings made with
handling and washing time;
• Easily transportable, easy to assemble and disassemble;
• Innovative design and the modular construction system make our wash bays
suitable for several indoor and outdoor uses;
• Environmentally friendly.
SUITABLE FOR THESE SECTORS
|Technical Specifications X-1|
|Useful dimensions mm
|Total dimensions mm
|Filtration tank dimensions mm (X-10)
|Maximum load capacity Kg
|Walls standard heigh mm||2200|
|Total dry weight of the bay kg||860|
|Diaphragm pump||0,054kW - 17lt/min.|
|Booster pump||0,37 kW – 5 to 40 lt/min.|
|Option filtering system||X-30; X-60|
|Option maximum load capacity kg||10000/20000|